Why is My Netgear WiFi Extender Not Working?

netgear extender setup

So you got yourself a wireless range extender by Netgear. That is a very good choice made by you. Despite having so many good features, the Netgear extender may also give some trouble. One of the common issues that is reported by many Netgear users is the Netgear extender not working. With this, users also experience mywifiext not working issue. If you are also struggling with similar issues, then walking through this troubleshooting guide will be helpful. We have compiled some best working tips that will help you fix the issue at hand.

Before Anything Else

The very best solution to eliminate issues with any technical device is to perform a power cycle. So before you try any other troubleshooting hack, power cycle your Netgear extender. Here are the steps to do the same:

  1. Disconnect the extender from the host router.
  2. Toggle the power button located on the Netgear extender to the Off position.
  3. Remove the power cable from the wall outlet.
  4. Let the extender sit in this state for a certain amount of time.
  5. After a while, plug the extender back.
  6. Toggle the power button to the On position now.
  7. Connect it back to the router.

Try to see if the issue has been fixed or not. Under any circumstances, this step could not get the issue fixed, then you need to give a try at the hacks that have been provided ahead.

Netgear Extender Not Working [Resolved]

Fix Connection Between devices

Perhaps the connection made between the Netgear wireless extender and the host router is not stable and firm which is why the extender is not working. Check the same and make the necessary changes. For instance, if you have connected the devices using an Ethernet cable then examine the cable properly. There ought to be no cuts on it. Get it replaced right away if damaged. Plus the Ethernet ports into which the cable is connected shouldn’t be damaged.

In the event of having a wireless connection between the two devices, check the distance between them. This should not be more than necessary that the devices find it difficult to communicate.

Make the required modifications to ensure that the connection is finger-tight. Try to access the Netgear extender network via Netgear_ext (SSID). It should be working now. Proceed to the next hack if the case is otherwise.

Ensure Adequate Power

The power supply to the Netgear wireless extender must be consistent. An unstable power supply can be the reason why your extender is not working. Ensure to plug the extender into a well-working power socket. Also, the cable should not be loose. In case of power outages, get involved a UPS. Be certain that the power supply is not fluctuating.

Contact ISP

If there is an issue with the internet connection, then also you will face issues while accessing the internet from your Netgear extender. Thus you need to contact your Internet Service Provider to confirm about the same. If any internet outages are going on then you need to take some time to get it fixed. You may also need to upgrade your internet plan.

Relocate the Extender

Have you placed your extender at a place from where it is difficult to access the network? Yes? Bad placement of the extender is also one reason why your extender is not working optimally. You need to relocate your extender now. While relocating, keep these things into consideration:

  • Place the extender closer to the host router.
  • Keep it away from other networking devices and also home appliances to avoid signal interference.
  • You need to choose an open and central area of the home for the extender.
  • Keep it away from doors and windows.
  • Do not choose a congested area in the home.
  • Keep it away from large water bodies in the home.

Verdict

This brings an end to our helpful post meant to help you fix Netgear wireless extender not working issue. We are hoping that your Netgear extender is working fine now. Under any circumstances, if your extender is still not working then reset it to the factory settings. This will erase the current configuration settings from it. Thereafter, set it up again and then update its firmware. We are very certain that the issue under discussion would no longer be bothering you after all this.

articlelength,updownews,livejustnews,newsalltype,thenextlaevel,justplangrow,approvedblog,letshareinfo,larablogy,updatexpert,gpforme, rankereports

Related Posts